Surface Methods Inspection
Magnetic Particle Inspection is a process for detecting surface and slightly subsurface discontinuities in carbon steel materials.
Suitable for:
New and in-service welds and components
Forgings, castings and wrought product
Penetrant Testing is a process for detecting discontinuities that are open to the surface of non-ferrous and ferrous materials.
Suitable for:
New and in-service welds
Forgings, castings and wrought products
Stainless steel, aluminium and carbon steel
Eddy Current Testing is used to detect surface flaws in materials typically without the removal of coatings on in-service equipment, and for the detection of flaws in conductive and non-conductive materials. Ideal for the inspection of cranes, lifting equipment, elevated work platforms to eliminate the removal of pain.
Suitable for:
Weld scanning, Tube testing of non-ferrous materials.
Coating thickness, Conductivity sorting.
Ultrasonic Testing
Ultrasonic Testing is used for flaw detection/evaluation, dimensional measurements, material characterization and more
Suitable for:
Plate quality grading
Structural welds
Piping welds
Pressure vessel welds
Forgings, castings and wrought products
Internal corrosion / erosion detection and mapping
Thickness testing
Conventional Radiography
Radiographic Testing is a method of inspecting materials for flaws. We have γ sources, X-ray and pulsed x-ray units.
Suitable for:
Piping welds
Pipe line welds
Pressure vessel welds
Structural welds
Internally / externally corroded piping and components
Forgings, castings and wrought products
CUI surveys
Dairy & Food Industry piping
Computed Radiography
iTest uses the HPX-PRO Portable CR System which is designed for high throughput computed imaging in rugged NDT environments.
Benefits
A portable solution that can be set-up in less than 5 minutes and process a weld in less than a minute.
Creating high-quality computed images for quick analysis and rapid final reporting. Computed image copies for ease of analysis and transfer between, clients and other experts.
In Service Inspection
We have a number of In-service inspector who are familiar with the inspection of pressure vessels, piping, tanks and pre-commissioning & commissioning inspections of pressure equipment.
In accordance with:
AS/NZS3788
API510
API570
API653
Welding Support
We provide welding support through education of welders and hands on tuition.
We also provide weld procedure development, welder qualification testing and welding inspection.
Any welding associated with:
Structures
Pressure piping / pressure vessels
Transport
In accordance with:
AS/NZS1554.1,2,3,4,5,6
AS/NZS3992
AS/NZS4041
ASME IX
ASME B31.1
ASME B31.3
AWS D1.1
Mobile Darkroom
Our Mobile Darkroom is fitted with an automatic processor to ensure quality of radiographs for those remote projects or where results are required on site so that down time is decreased.
The Mobile Darkroom can be set up quickly, run off its own power or from an external 240v supply.
Rope Access
We have IRATA certified personnel who are able to provide rope access inspections to eliminate the cost of having to build scaffolding.